Di Pacci — Heat-Exchanger PID Espresso Machine with Rotary Pump
Quick Mill Aquila PID White Coffee Machine
The Quick Mill Aquila PID pairs a 1.8 litre heat-exchanger boiler with PID control and a quiet rotary pump, in a white stainless body that can run from its tank or plumb straight into mains water.
The Quick Mill Aquila PID is an Italian heat-exchanger espresso machine for home baristas who want to brew and steam at the same time. Its 1.8 litre insulated stainless boiler is held steady by PID, an OLED display shows temperature and a shot timer, and a rotary pump lets you run from the 3 litre tank or connect directly to mains water.
Quick Mill's rotary pump system cuts vibration by up to 40 percent compared with its standard pumps, so the Aquila is noticeably quieter than a vibration-pump HX. Programmable pre-infusion, standby and eco modes sit behind the display, and the white powder-coated stainless body is finished with wooden joysticks and portafilter handle.
1.8 LStainless HX boiler
PIDWith OLED display and shot timer
RotaryTank or plumb-in
10 AMP1300–1700 W, standard outlet
🔥 Heat Exchanger 🌡️ PID Control 🔁 Rotary Pump 🚰 Plumb-In Ready ⏱️ Shot Timer 💧 Programmable Pre-Infusion 🇮🇹 Made in Italy ✅ Available to Order — Australia
Best for: 🥛 Milk-drink households · 🏠 Home baristas upgrading · 🚰 Plumbed kitchens · 🤫 Quieter mornings · 🎨 White kitchens
Free standard shipping Australia-wide on orders over $200. Standard shipping is $14.95 for orders below $200. Same-day dispatch for orders placed before 2PM, with secured, tracked delivery. Plumbed installation available for Sydney metro areas.
Key Features of the Aquila PID
🔥 Brew and steam together
The heat-exchanger boiler keeps steam on tap while fresh water is heated for each shot, so lattes don't mean waiting between steps.
🌡️ PID with OLED display
PID holds boiler temperature steady, and the display shows temperature, a shot timer and a low-water warning.
🔁 Quiet rotary pump
Quick Mill's rotary system cuts vibration by up to 40 percent, making early-morning shots far less noisy.
🚰 Tank or mains water
Run from the 3 litre tank or connect directly to mains water and stop refilling altogether.
💧 Programmable pre-infusion
Set a gentle pre-wet before full pressure, plus standby and eco modes to save power.
📊 Dual pressure gauge
Watch pump and boiler pressure side by side while you dial in each shot.
How a PID Heat Exchanger Brews and Steams at Once
A heat-exchanger machine has one boiler held at steam temperature, with a separate tube running through it that heats fresh water for each shot. The Aquila adds PID control to make that boiler far more predictable.
- The 1.8 litre boiler sits at steam temperature, ready for milk at any moment.
- Brew water passes through the heat exchanger inside the boiler, so every shot uses fresh water rather than water that has sat in the boiler.
- PID holds the boiler temperature tightly, so brew temperature stays consistent from one shot to the next instead of drifting with a pressurestat.
The result is café-style workflow on one boiler: pull a shot and steam milk at the same time, with the consistency PID brings.
Complete Technical Specifications
| Product Information |
| Brand |
Quick Mill |
| Model |
Aquila PID |
| Colour |
White |
| Made in |
Italy |
| Warranty |
12 months parts & labour (Australian warranty via Di Pacci) |
| Boiler & Group Head |
| Boiler |
1.8 L insulated stainless steel, heat exchanger |
| Group |
Quick Mill brew group with stainless steel mushroom |
| Warm-up |
About 12 minutes |
| Temperature & Control |
| Temperature control |
PID |
| Display |
OLED: temperature, shot timer, low-water warning |
| Programs |
Programmable pre-infusion, standby and eco mode |
| Gauges |
Dual gauge for pump and boiler pressure |
| Pump & Steam |
| Pump |
Rotary |
| Steam and hot water wands |
Anti-burn, multidirectional |
| Taps |
Joystick taps with wooden handles |
| Water & Physical |
| Water tank |
3 L |
| Mains connection |
Yes, can be connected directly to mains water |
| Body |
Stainless steel, white finish |
| Dimensions (W × D × H) |
308 × 482 × 363 mm |
| Weight |
28.5 kg |
| Power |
| Voltage |
220–230 V, 50 Hz |
| Power |
1300–1700 W |
| Power point |
Standard 10 amp |
What's in the Box
- Quick Mill Aquila PID espresso machine (white)
- Portafilter with wooden handle and filter baskets
You'll still need an espresso grinder, a 58 mm tamper and a milk jug. Plumbing in needs a mains water point and ideally a water filter.
Aquila PID vs Lelit Bianca V3
The Lelit Bianca V3 is the usual step up for buyers wanting a dual boiler and flow control.
| Feature |
Quick Mill Aquila PID |
Lelit Bianca V3 |
| Boiler setup |
1.8 L heat exchanger |
0.8 L brew + 1.5 L steam dual boiler |
| Temperature control |
PID |
Dual PID |
| Flow control |
No |
Yes, paddle on the E61 group |
| Pump |
Rotary |
Rotary |
| Water |
3 L tank or mains |
2.5 L tank or mains |
Di Pacci recommendation: Choose the Aquila PID if you want a quiet, plumbable machine that brews and steams together without paying for a second boiler. Don't bother if you want to set brew and steam temperatures separately or profile flow; the Lelit Bianca V3 is the better buy for that.
Best Grinders for the Aquila PID
Pick a grinder with fine espresso adjustment that suits a machine at this level.
| Grinder |
Burr |
Why it pairs well |
| Niche Zero |
63 mm conical |
Single-dose with near-zero retention, ideal for switching beans |
| Eureka Mignon Specialita 55 |
55 mm flat |
Quiet and stepless, matching the Aquila's quiet rotary pump |
| Turin DF64 Gen 2 |
64 mm flat |
Flat-burr clarity for lighter roasts and milk drinks alike |
Browse the complete home grinder range for more options.
Who This Machine Is For
✓ Ideal if you:
- Make milk drinks most days and want to steam while you brew
- Want a quiet rotary pump in the kitchen
- Plan to plumb the machine into mains water
- Want PID stability without the cost of a dual boiler
- Have about 31 cm of bench width and 48 cm of depth
✗ Consider alternatives if you:
- Want separate brew and steam temperatures or flow control; see the Lelit Bianca V3
- Want a compact dual boiler; the ACS Minima is 270 mm wide
- Are buying your first machine on a tight budget; try the Lelit Anna PL41
- Mostly drink black coffee and rarely steam milk
Quick Mill Aquila PID White Coffee Machine — Frequently Asked Questions
Is the Quick Mill Aquila PID a heat exchanger or dual boiler?
It is a heat exchanger. One 1.8 litre insulated stainless boiler provides steam, while fresh brew water is heated as it passes through the heat exchanger, so you can brew and steam at the same time.
Can the Quick Mill Aquila PID be plumbed in?
Yes. It runs from its 3 litre tank or can be connected directly to mains water. Di Pacci offers plumbed installation in Sydney metro areas.
Does the Aquila PID need a 15 amp power point?
No. It draws 1300 to 1700 W and runs on a standard 10 amp outlet.
How long does the Aquila PID take to heat up?
Quick Mill quotes about 12 minutes from cold to ready.
What does the PID display show?
The OLED display shows boiler temperature, a shot timer and a low-water warning, and gives access to pre-infusion, standby and eco settings.
Is the white Aquila PID different from the other colours?
Only in finish. The white, black and stainless versions share the same boiler, pump and controls.
Who services Quick Mill machines in Australia?
Di Pacci's in-house service team supports Quick Mill machines with parts in stock. Call (02) 9758 0760 for servicing or advice.
Why Buy the Aquila PID from Di Pacci
Authorised Quick Mill dealer with genuine Australian stock, an in-house service team with parts in stock, five showrooms (Sydney/Roselands, Melbourne, Perth, Port Macquarie, Queensland), in-store demonstrations, expert pairing advice, finance options, free shipping over $200, and a 12 months parts & labour warranty. Di Pacci Coffee Co. has been in coffee since 2003.
